Blades - Sub Category Antique Militaria - Category
Item: A rare fair condition pre 1804 naval figure of eight cutlass, no scabbard. Overview: An early naval cutlass of pre-1804 type, with a straight blade and double guard. This example is crudely made, reflecting the plain, practical character of these weapons. From the beginning of the 18th century, the cutlass began to be adopted as the melee weapon for naval ratings. The Board of Ordnance placed orders for quantities of these weapons, but they do not appear to have followed a set pattern, with different manufacturers supplying their own styles. Surviving weapons from this period have blades measuring approximately 25–28.5 inches (64–72 cm), often with a fuller along the back edge. Hilts were made in both brass and steel. Brass was more resistant to corrosion but was heavier and more easily damaged, and many surviving examples show damage to the knuckle guard or quillon. By the middle of the century, improvements in steel production had reduced costs, and the Royal Navy increasingly adopted steel hilts, often painted black for protection against corrosion. From around the middle of the century, the Board of Ordnance favoured the distinctive “double-disc” or “figure-of-eight” hilt. This form is thought to have originated with weapons supplied by Thomas Hollier of Whitechapel, who sold 1,000 cutlasses to the Board in 1726. The guard comprised one disc forming the crossguard and another protecting the knuckles. Although antler had previously been used for grips, the Board subsequently adopted a plain tubular steel grip, which was cheaper but could be slippery when wet. Many surviving examples have relatively blunt points and flat blades with limited stiffness, making them better suited to cutting than thrusting. Their heavy blades may also have served the practical purpose of cutting away canvas and ropes aboard ship.
Item: A rare fair condition pre 1804 naval figure of eight cutlass, no scabbard. Overview: An early naval cutlass of pre-1804 type, with a straight blade and double guard. This example is crudely made, reflecting the plain, practical character of these weapons. From the beginning of the 18th century, the cutlass began to be adopted as the melee weapon for naval ratings. The Board of Ordnance placed orders for quantities of these weapons, but they do not appear to have followed a set pattern, with different manufacturers supplying their own styles. Surviving weapons from this period have blades measuring approximately 25–28.5 inches (64–72 cm), often with a fuller along the back edge. Hilts were made in both brass and steel. Brass was more resistant to corrosion but was heavier and more easily damaged, and many surviving examples show damage to the knuckle guard or quillon. By the middle of the century, improvements in steel production had reduced costs, and the Royal Navy increasingly adopted steel hilts, often painted black for protection against corrosion. From around the middle of the century, the Board of Ordnance favoured the distinctive “double-disc” or “figure-of-eight” hilt. This form is thought to have originated with weapons supplied by Thomas Hollier of Whitechapel, who sold 1,000 cutlasses to the Board in 1726. The guard comprised one disc forming the crossguard and another protecting the knuckles. Although antler had previously been used for grips, the Board subsequently adopted a plain tubular steel grip, which was cheaper but could be slippery when wet. Many surviving examples have relatively blunt points and flat blades with limited stiffness, making them better suited to cutting than thrusting. Their heavy blades may also have served the practical purpose of cutting away canvas and ropes aboard ship.
Item: A rare fair condition pre 1804 naval figure of eight cutlass, no scabbard. Overview: An early naval cutlass of pre-1804 type, with a straight blade and double guard. This example is crudely made, reflecting the plain, practical character of these weapons. From the beginning of the 18th century, the cutlass began to be adopted as the melee weapon for naval ratings. The Board of Ordnance placed orders for quantities of these weapons, but they do not appear to have followed a set pattern, with different manufacturers supplying their own styles. Surviving weapons from this period have blades measuring approximately 25–28.5 inches (64–72 cm), often with a fuller along the back edge. Hilts were made in both brass and steel. Brass was more resistant to corrosion but was heavier and more easily damaged, and many surviving examples show damage to the knuckle guard or quillon. By the middle of the century, improvements in steel production had reduced costs, and the Royal Navy increasingly adopted steel hilts, often painted black for protection against corrosion. From around the middle of the century, the Board of Ordnance favoured the distinctive “double-disc” or “figure-of-eight” hilt. This form is thought to have originated with weapons supplied by Thomas Hollier of Whitechapel, who sold 1,000 cutlasses to the Board in 1726. The guard comprised one disc forming the crossguard and another protecting the knuckles. Although antler had previously been used for grips, the Board subsequently adopted a plain tubular steel grip, which was cheaper but could be slippery when wet. Many surviving examples have relatively blunt points and flat blades with limited stiffness, making them better suited to cutting than thrusting. Their heavy blades may also have served the practical purpose of cutting away canvas and ropes aboard ship.
Item: A rare fair condition pre 1804 naval figure of eight cutlass, no scabbard. Overview: An early naval cutlass of pre-1804 type, with a straight blade and double guard. This example is crudely made, reflecting the plain, practical character of these weapons. From the beginning of the 18th century, the cutlass began to be adopted as the melee weapon for naval ratings. The Board of Ordnance placed orders for quantities of these weapons, but they do not appear to have followed a set pattern, with different manufacturers supplying their own styles. Surviving weapons from this period have blades measuring approximately 25–28.5 inches (64–72 cm), often with a fuller along the back edge. Hilts were made in both brass and steel. Brass was more resistant to corrosion but was heavier and more easily damaged, and many surviving examples show damage to the knuckle guard or quillon. By the middle of the century, improvements in steel production had reduced costs, and the Royal Navy increasingly adopted steel hilts, often painted black for protection against corrosion. From around the middle of the century, the Board of Ordnance favoured the distinctive “double-disc” or “figure-of-eight” hilt. This form is thought to have originated with weapons supplied by Thomas Hollier of Whitechapel, who sold 1,000 cutlasses to the Board in 1726. The guard comprised one disc forming the crossguard and another protecting the knuckles. Although antler had previously been used for grips, the Board subsequently adopted a plain tubular steel grip, which was cheaper but could be slippery when wet. Many surviving examples have relatively blunt points and flat blades with limited stiffness, making them better suited to cutting than thrusting. Their heavy blades may also have served the practical purpose of cutting away canvas and ropes aboard ship.
Item: A rare fair condition pre 1804 naval figure of eight cutlass, no scabbard. Overview: An early naval cutlass of pre-1804 type, with a straight blade and double guard. This example is crudely made, reflecting the plain, practical character of these weapons. From the beginning of the 18th century, the cutlass began to be adopted as the melee weapon for naval ratings. The Board of Ordnance placed orders for quantities of these weapons, but they do not appear to have followed a set pattern, with different manufacturers supplying their own styles. Surviving weapons from this period have blades measuring approximately 25–28.5 inches (64–72 cm), often with a fuller along the back edge. Hilts were made in both brass and steel. Brass was more resistant to corrosion but was heavier and more easily damaged, and many surviving examples show damage to the knuckle guard or quillon. By the middle of the century, improvements in steel production had reduced costs, and the Royal Navy increasingly adopted steel hilts, often painted black for protection against corrosion. From around the middle of the century, the Board of Ordnance favoured the distinctive “double-disc” or “figure-of-eight” hilt. This form is thought to have originated with weapons supplied by Thomas Hollier of Whitechapel, who sold 1,000 cutlasses to the Board in 1726. The guard comprised one disc forming the crossguard and another protecting the knuckles. Although antler had previously been used for grips, the Board subsequently adopted a plain tubular steel grip, which was cheaper but could be slippery when wet. Many surviving examples have relatively blunt points and flat blades with limited stiffness, making them better suited to cutting than thrusting. Their heavy blades may also have served the practical purpose of cutting away canvas and ropes aboard ship.
Item: A rare fair condition pre 1804 naval figure of eight cutlass, no scabbard. Overview: An early naval cutlass of pre-1804 type, with a straight blade and double guard. This example is crudely made, reflecting the plain, practical character of these weapons. From the beginning of the 18th century, the cutlass began to be adopted as the melee weapon for naval ratings. The Board of Ordnance placed orders for quantities of these weapons, but they do not appear to have followed a set pattern, with different manufacturers supplying their own styles. Surviving weapons from this period have blades measuring approximately 25–28.5 inches (64–72 cm), often with a fuller along the back edge. Hilts were made in both brass and steel. Brass was more resistant to corrosion but was heavier and more easily damaged, and many surviving examples show damage to the knuckle guard or quillon. By the middle of the century, improvements in steel production had reduced costs, and the Royal Navy increasingly adopted steel hilts, often painted black for protection against corrosion. From around the middle of the century, the Board of Ordnance favoured the distinctive “double-disc” or “figure-of-eight” hilt. This form is thought to have originated with weapons supplied by Thomas Hollier of Whitechapel, who sold 1,000 cutlasses to the Board in 1726. The guard comprised one disc forming the crossguard and another protecting the knuckles. Although antler had previously been used for grips, the Board subsequently adopted a plain tubular steel grip, which was cheaper but could be slippery when wet. Many surviving examples have relatively blunt points and flat blades with limited stiffness, making them better suited to cutting than thrusting. Their heavy blades may also have served the practical purpose of cutting away canvas and ropes aboard ship.

ID: 8860

Pre 1804 Naval Figure Of Eight Seamans Cutlass

  • Price: £695.00
  • International buyers welcome — prices shown in GBP (£). Please enquire for equivalent USD ($) or EUR (€) rates.
Make An Offer

There is no payment system built into this website. However, pressing the "reserve" button will prompt the seller to hold the item for one week, allowing for payment negotiation to be agreed upon and advise the selling party that a buyer is interested.

Please contact the Seller directly regarding postage.
International postage (including the United States) is available.

Collection Available

Interior Decoration Generator

Use our AI-powered visualisation tool to see how furniture and décor could look in your home. Upload a photo of your room and the system will place the selected item into the scene.

Experiment with interior design ideas before making a decision and see how pieces may work with your room’s space, lighting, and style.

A free account is required so we can securely process your images and save your visualisations for later comparison.

Images are generated using AI and are intended as a visual guide only. Colours, proportions, and placement may not be perfectly accurate.

Login/Create a free account to continue
After Before
‹ ›
Room Designer

Choose Up To 4 Antiques

Select a type, period, and item for each slot. Your AJAX-loaded item preview appears immediately, and the full room renders below when the user clicks generate. This visualisation is generated using AI and is intended as a guide only. Placement, scale, and appearance may not be 100% accurate.

















Login/Create a free account to continue
Generated room preview Selected room background
‹ ›

Description 🔉

Item:
A rare fair condition pre 1804 naval figure of eight cutlass, no scabbard.

Overview:

An early naval cutlass of pre-1804 type, with a straight blade and double guard. This example is crudely made, reflecting the plain, practical character of these weapons.

From the beginning of the 18th century, the cutlass began to be adopted as the melee weapon for naval ratings. The Board of Ordnance placed orders for quantities of these weapons, but they do not appear to have followed a set pattern, with different manufacturers supplying their own styles.

Surviving weapons from this period have blades measuring approximately 25–28.5 inches (64–72 cm), often with a fuller along the back edge. Hilts were made in both brass and steel. Brass was more resistant to corrosion but was heavier and more easily damaged, and many surviving examples show damage to the knuckle guard or quillon. By the middle of the century, improvements in steel production had reduced costs, and the Royal Navy increasingly adopted steel hilts, often painted black for protection against corrosion.

From around the middle of the century, the Board of Ordnance favoured the distinctive “double-disc” or “figure-of-eight” hilt. This form is thought to have originated with weapons supplied by Thomas Hollier of Whitechapel, who sold 1,000 cutlasses to the Board in 1726. The guard comprised one disc forming the crossguard and another protecting the knuckles. Although antler had previously been used for grips, the Board subsequently adopted a plain tubular steel grip, which was cheaper but could be slippery when wet.

Many surviving examples have relatively blunt points and flat blades with limited stiffness, making them better suited to cutting than thrusting. Their heavy blades may also have served the practical purpose of cutting away canvas and ropes aboard ship.

Digital Shop Viewer

Seller Details

VISIT SELLERS SHOP
TAKE SHOP TOUR
  • Address:
  • 21 Watergate, Whitchurch, Shropshire, UK.
  • SY131DP
  • Interested in Seeing Other Antique Shops Nearby?
  • Note:
  • Raven Yard Antiques Shop is a family run business located in the picturesque part of Shropshire in the Roman town of Whitchurch. We have a diverse selection of rare and historic goods to choose from. Please browse our online store or else visit our shop to see some of our amazing items.

🏛️ View All UK Antique Dealers
›
📍 View Antique Dealers in Shropshire
›
🏪 View Antique Shops in Whitchurch
›
📍 View UK Militaria Dealers
›
📍 View Militaria Dealers Near Manchester
›

Legal Note

For antique firearms such as muskets and rifles, this item is offered strictly as a collectors’ piece. It is sold as a historic firearm for display or study purposes only, and not as a modern, live-firing weapon. Export, import, and ownership regulations vary by country; buyers are responsible for ensuring compliance with their local laws and confirming that they are not prohibited from ownership. In accordance with UK guidelines, the seller is required to verify the buyer’s identification and age prior to completion of the sale. By purchasing antique weapons, the buyer is also consenting that they are not on a prohibited person register.

Newest Items.

SEE MORE
New
Type 16 Bore Percussion Pistol Dated 1858

Product ID: 8863

Type 16 Bore Percussion Pistol Dated 185..., For Sale

Buy It Now: £625.00

● AVAILABLE
Available to buy
New
Hsat Mkii Airborne Paratroopers Helmet Dated 1943

Product ID: 8862

Hsat Mkii Airborne Paratroopers Helmet D..., For Sale

Buy It Now: £1,050.00

● AVAILABLE
Available to buy
New
Pattern 1814 Figure Of Eight Naval Cutlass

Product ID: 8861

Pattern 1814 Figure Of Eight Naval Cutla..., For Sale

Buy It Now: £695.00

● AVAILABLE
Available to buy
New
Pre 1804 Naval Figure Of Eight Seamans Cutlass

Product ID: 8860

Pre 1804 Naval Figure Of Eight Seamans C..., For Sale

Buy It Now: £695.00

● AVAILABLE
Available to buy
New
Penny Farthing Ordinary Bicycle

Product ID: 8854

Penny Farthing Ordinary Bicycle, For Sale

Buy It Now: £5,000.00

● AVAILABLE
Available to buy
New
A Bronze Sculpture Of An Outstretched Eagle, Signed

Product ID: 8851

A Bronze Sculpture Of An Outstretched Ea..., For Sale

Buy It Now: £285.00

● AVAILABLE
Available to buy
New
Royal Couldron England Art Deco Mottled Stoneware Jug

Product ID: 8850

Royal Couldron England Art Deco Mottled..., For Sale

Buy It Now: £35.00

● AVAILABLE
Available to buy
New
Chinese Nationalist Party Army Short Sword

Product ID: 8839

Chinese Nationalist Party Army Short Swo..., For Sale

Buy It Now: £795.00

● AVAILABLE
Available to buy